Loli Colorful Poly Base

Strengthening Polybase No04 – light pink LOLI POLY BASE – a colored polybase in gentle summer shades for quick leveling and strengthening of nails. This hybrid product combines gel polish and gel system qualities, with a color base featuring polygel properties. It can be used as a standalone color coating for medium–length nail strengthening using the gel leveling technique. It can also be used for minor length extensions. Its convenient medium–thick consistency has moderate viscosity for efficient application. It is applied in one layer and levels well when the hand is turned upside down. The maximum allowable thickness at the apex is 1mm. It has no sharp odor and does not clog up the drill. The main benefit of LOLI POLY BASE is the reduction in the technician’s working time. Consistency: thick. Polymerization speed: medium. Hardness: medium. Plasticity: medium. Pigmentation: medium. Acidity: low. Application technology: 0. Prepare the nail plate for coating: perform a manicure and shape the nail free edge as desired. If a remover is used, wipe any residue with a damp cloth. 1. Degreasing: Degrease the nail plate mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free cloth. 2. Dehydration: Apply NAIL FRESHER on the entire nail and let it air dry until a whitish hue appears on the nail surface. 3. Bonding: Using a semi–dry brush, apply acid–free primer ULTRABOND on the entire nail, leaving a 1mm gap from the cuticle and sidewalls. Allow it to air dry for 15 seconds. If using MULTI SLIM BASE or PRO BASE BOND, skip this step. 4. Base layer: Apply a thin, even layer of MULTI SLIM / PRO BASE BOND for the base coat. Polymerize the base coat in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 5. Color: Apply LOLI POLY BASE in an even layer, add a drop, and level using the no–file technique. Polymerize the polybase in a UV lamp for 2–4 minutes, or in an LED lamp for 60–90 seconds. Buff the free edge and, if necessary, file the undersides. 6. Finish: Seal the coating with a top coat. Polymerize in a UV lamp for 2–3 minutes, or in an LED lamp for at least 1 minute.