Colorful Loli Poly Base

Strengthening Polybase No06 – Peach LOLI POLY BASE – a colored polybase in gentle summer shades for quick leveling and strengthening of nails. A hybrid product combining gel polish and gel systems, this colored base possesses polygel properties. It is used as a standalone color coating for strengthening medium–length nails using the gel leveling technique. It can be used for minor length extensions. The formula has a convenient medium–thick consistency with moderate viscosity for quick application. It is applied in one layer and self–levels well when the hand is flipped. The maximum allowable material thickness at the apex is 1mm. It has no sharp odor and does not clog the drill bit. The main advantage of LOLI POLY BASE is that it reduces the working time for the technician. Consistency: thick. Polymerization speed: medium. Hardness: medium. Plasticity: medium. Pigmentation: medium. Acidity: low. Application technology: 0. Prepare the nail plate for coating: perform a manicure and shape the free edge of the nail as needed. If a remover was used, wipe off the residues with a damp napkin. 1. Degreasing: degrease the nail plate mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free napkin. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish tint appears on the surface of the plate. 3. Bonding: with a semi–dry brush, apply the acid–free primer ULTRABOND to the entire nail, leaving a 1mm gap from the cuticle and side walls. Allow to air dry for 15 seconds; if using MULTI SLIM BASE or PRO BASE BOND, skip this step. 4. Base layer: apply a thin, even layer of the base covering MULTI SLIM / PRO BASE BOND. Polymerize the base coat in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 5. Color: apply LOLI POLY BASE in an even layer, add a drop, and smooth it out using the non–dust technique. Polymerize the polybase in a UV lamp for 2–4 minutes, or in an LED lamp for 60–90 seconds. File the free edge as necessary and shape the underside if needed. 6. Finish: seal the coating with a topcoat. Polymerize in a UV lamp for 2–3 minutes, or in an LED lamp for 1 minute.