Colorful Loli Poly Base

Strengthening Poly Base No07 – a bright yellow LOLI POLY BASE – is a colored poly base in soft summer shades for quick leveling and strengthening of nails. It is a hybrid product of gel polish and gel systems, featuring the properties of poly gel. It can be used independently as a color coating for strengthening medium–length nails using the gel leveling technique. It can also be used for adding small lengths. Its convenient medium–thick consistency allows for quick application. It is applied in one layer, self–leveling well when the hand is turned upside down. The maximum permissible thickness at the apex is 1mm. It does not have a sharp odor and does not clog the drill bit. The main advantage of LOLI POLY BASE is that it reduces the master’s working time. Consistency: thick. Polymerization speed: medium. Hardness: medium. Flexibility: medium. Pigmentation: medium. Acidity: low. Application technique: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail as required. If using a remover, wipe off its residue with a wet wipe. 1. Degreasing: degrease the nail plate both mechanically (using a buff) and chemically (with PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER to the entire nail and allow it to dry in the air until a whitish tint appears on the surface of the natural nail plate. 3. Bonding: using a semi–dry brush, apply a acid–free primer ULTRABOND to the entire nail, keeping a 1mm distance from the cuticle and sidewalls. Allow it to dry in the air for 15 seconds; if using MULTI SLIM BASE or PRO BASE BOND, skip this step. 4. Base layer: apply a thin, even layer of the primer MULTI SLIM / PRO BASE BOND. Polymerize the base coat in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 5. Color: apply LOLI POLY BASE in an even layer, add a drop and level using a no–file technique. Polymerize the poly base in a UV lamp for 2–4 minutes, or in an LED lamp for 60–90 seconds. File the free edge as needed and buff the inside. 6. Finish: secure the coating with a top coat. Polymerize in a UV lamp for 2–3 minutes, or in an LED lamp for at least 1 minute.