Colored Loli Poly Base

Strengthening Poly Base No08 – light yellow LOLI POLY BASE – a colored poly base in gentle summer shades for quick leveling and strengthening of nails. This hybrid product combines gel polish and gel systems, featuring a colored base with poly gel properties. It is used as a standalone color coating to strengthen medium–length nails using gel leveling technique. It can also be used for minor length extension. The product has a convenient medium–thick consistency with moderate viscosity for quick application. It is applied in one layer, self–levels well when the hand is inverted. The maximum allowable thickness at the apex is 1mm. It has no sharp odor and does not clog the drill. The main advantage of LOLI POLY BASE is that it reduces the masters working time. Consistency: thick. Polymerization speed: medium. Hardness: medium. Plasticity: medium. Pigmentation: medium. Acidity: low. Application technology: 0. Prepare the nail plate for coverage: perform a manicure and shape the free edge of the nail as needed. If using a remover, wipe off any residues with a damp cloth. 1. Degreasing: degrease the nail plate mechanically (using a buffer) and chemically (with PREPFINISH and a lint–free cloth. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish tint appears on the surface. 3. Bonding: with a semi–dry brush, apply the acid–free primer ULTRABOND to the whole nail, keeping 1mm away from the cuticle and sidewalls. Let it air dry for 15 seconds; if using MULTI SLIM BASE or PRO BASE BOND, skip this step. 4. Base layer: apply the base coat MULTI SLIM / PRO BASE BOND in a thin, even layer. Polymerize the base coat in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 5. Color: apply LOLI POLY BASE in an even layer, add a drop, and level it using the dust–free technique. Polymerize the poly base in a UV lamp for 2–4 minutes, or in an LED lamp for 60–90 seconds. File the free edge, and contour as necessary. 6. Finish: seal the coating with a top coat. Polymerize in a UV lamp for 2–3 minutes, or in an LED lamp for at least 1 minute.