PRO BASE-BOND Gel System Base

PRO BASE–BOND is a thin bonding base for gel systems. It is used as a priming adhesive base under solid polymer materials: gels, acrylgels, and acrylics. The main advantage of PRO BASE–BOND is that it does not require the use of ULTRABOND or ACID PRIMER bonds. It ensures perfect adhesion of materials to the natural nail (NN) without thickening the coating and speeds up the application process – it is sufficiently acidic but not suitable for clients with hypersensitive or damaged NN. Hardness: medium. Viscosity: medium. Density: low. Acidity: high. Application technology: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail. 1. Degreasing: mechanically (using a buffer) and chemically (with PREPFINISH and a lint–free wipe) degrease the nail plate. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to dry air until a whitish tint appears on the surface. 3. Bonding: skip this step when using PRO BASE–BOND. 4. Base layer: apply the base evenly without leveling, paying attention to the side areas and free edge. Cure in a UV lamp for 2–4 minutes, or in an LED lamp for 90 seconds. PRO tip: do NOT remove the tacky layer from the base before applying gel products and do NOT use as a leveling layer.