Funky Gum Gel in a Jar

Clear Funky Gum Gel in a 15ml jar is a gel chew for creating dimensional designs with a sticky layer. It is used for 3D designs and modeling volumetric elements of any size and shape. The gel maintains flexibility after curing, minimizing trauma while wearing large volume designs. It is not recommended to apply Funky Gum to the entire nail surface. Physical and chemical properties: – Consistency: thick – Curing speed: low – Flexibility after curing – pH: 6 APPLICATION TECHNIQUE: 0–4 Prepare the nail plate using the standard method: manicure, degreasing, dehydration, bonding. Apply a base coat and color if needed. 5. Design: 5. 1 Using a spatula or stick, take a small amount of gel chew and create a volumetric element in the desired shape. For application, periodically moisten the tool (or fingers) with the alcohol–based PREPFINISH solution. 5. 2 Place the decorative element on the sticky layer of the coating. Cure in a UV/LED lamp for 120/60 seconds. 5. 3 Remove the sticky layer using PREPFINISH and a lint–free wipe. 6. Top: Secure the finished design with a top coat. For hard–to–reach areas, use a liner. Cure in a UV lamp for 2–3 minutes, and in an LED lamp for 1 minute. Removal: To remove designs using Funky Gum, it is recommended to trim off the bulk with a cuticle nipper, and remove the residue with a drill or by soaking with Gel Remover. PRO TIP: For ease of use, it is recommended to create volumetric elements by hand without gloves. To enhance design variability, dry pigments, glitter, and other dry decor can be mixed into the gel chew.