3D Funky Volume Design Gel

3D Funky Art Gel – Lilac Gel for Voluminous Designs – is a colored gel without a sticky layer, packed in a tube, intended for voluminous designs. It is used for: – Korean–style designs: transparent flowers, waves, droplets – sculpting voluminous elements directly from the tube – increasing design variability: rub in pigments, glitters, and powders on the cured gel. Advantages of 3D Funky Art Gel: – can be used at any stage of application, including over the top coat – does not require a top coat – easily controls the thickness and volume of material by adjusting pressure on the tube – easily filed with a drill or file. Consistency: thick. Polymerization speed: medium. After polymerization: hard. Viscosity: low. Pigmentation: high. HOW TO APPLY 3D GEL: 1. Prepare the nail and apply base gel/gel polish/color/top coat. 2. Design: squeeze the required amount of gel onto the nail by pressing the tube. Use a liner to refine the design if necessary. Cure under a UV/LED lamp for 120/90 seconds. 3. Finish: if color, glitter, or other decor was applied over the gel, seal with a top coat. Cure under a UV/LED lamp for at least 1 minute. WARNING: BEFORE USING THE COLORED GEL, IT IS RECOMMENDED TO SQUEEZE THE TUBE WITH YOUR FINGERS. Pro Tip: For extreme volume, prioritize applying and curing the material in layers. Recommended layer thickness – up to 3 mm for 1 layer.