3D Funky Volume Gel for Design

VOLUME GEL FOR 3D DESIGNS – SALAD GREEN 3D Funky Art Gel – a colored gel without a sticky layer for 3D designs in a tube. Use for: – Korean–style designs: transparent flowers, waves, drops – sculpting 3D elements directly from the tube – increasing design variability: rub in pigments, glitters on cured gel. Advantages of 3D Funky Art Gel: – can be used at any stage of application, including over the top coat – does not require a top coat – easy to control the thickness and volume of material by adjusting the pressure on the tube – easily filed with a drill or file. Consistency: thick. Curing time: medium. After curing: hard. Viscosity: low. Pigmentation: high. HOW TO APPLY 3D GEL 1. Prepare the nail plate and apply base/gel/gel polish/color/top coat. 2. Design: press the tube to dispense the desired amount of gel onto the nail. Refine the design with a brush or liner if necessary. Cure in a UV/LED lamp for 120/90 seconds. 3. Finish: if color, pigment, or other decor was applied to the gel – secure with a top coat and cure in a UV/LED lamp for 1 minute. WARNING: BEFORE USE, IT IS RECOMMENDED TO KNEAD THE TUBE WITH YOUR FINGERS (PALMS. PRO TIP: FOR EXTREME VOLUME, APPLY GEL IN LAYERS WITH EACH LAYER CURED. RECOMMENDED THICKNESS FOR ONE LAYER IS UP TO 3 MM.