3D Funky Volume Gel

3D Funky Art Gel – Blue is a colorful gel without a sticky layer, designed for 3D designs in a tube. It is used for: – Korean–style designs: transparent flowers, waves, droplets – sculpting 3D elements directly from the tube – increasing design variability: rub in pigments, glitters on cured gel. Benefits of 3D Funky Art Gel: – can be used at any stage of application, including on top of a top coat – does not require a top coat – allows easy control of material thickness and volume by adjusting the pressure on the tube – easy to file with a drill or file. Consistency: thick. Curing speed: medium. After curing: hard. Viscosity: low. Pigmentation: high. HOW TO APPLY 3D GEL: 1. Prepare the nail and apply a base/gel/gel polish/color/top coat. 2. Design: squeeze the desired amount of gel onto the nail by pressing the tube. If needed, use a liner to refine the design. Cure under a UV/LED lamp for 120/90 seconds. 3. Finish: if color, pigment, or other decor was applied over the gel, seal with a top coat. Cure under a UV/LED lamp for at least 1 minute. ATTENTION: BEFORE USING COLORED GEL, WE RECOMMEND SOFTLY SQUEEZING THE TUBE WITH YOUR FINGERS. PRO TIP: FOR EXTREME VOLUMES, PREFER LAYERED APPLICATION AND CURING OF THE MATERIAL. RECOMMENDED THICKNESS OF APPLICATION: UP TO 3 MM PER LAYER.