3D Funky Volume Gel for Hair Designs

VOLUMIZING DESIGN GEL – BLUE STAINED GLASS 3D Funky Art Gel – a colored gel without a sticky layer for volumizing designs, available in a tube. It is used for: – Korean–style designs: transparent flowers, waves, droplets – sculpting volumetric elements directly from the tube – increasing design variability: rub in rubbers, pigments, glitters onto the dried gel. Advantages of 3D Funky Art Gel: – can be used at any stage of application, including over the top coat – does not require an additional top coat – allows precise control over the thickness and volume of the material by increasing/decreasing pressure on the tube – easily filed down with a drill or file. Consistency: thick. Polymerization speed: medium. After polymerization: hard. Viscosity: low. Pigmentation: high. HOW TO APPLY 3D GEL 1. Prepare the nails and apply a base/gel/gel polish/color/top coat. 2. Design: squeeze the required amount of gel onto the nail by pressing the tube. If needed, adjust the design using a liner. Polymerize in a UV/LED lamp for 120/90 seconds. 3. Finish: if color, rubbing powder, or other decor was applied over the gel – seal with a top coat. Polymerize in UV/LED lamp for at least 1 minute. WARNING: BEFORE USING COLORED GEL, IT IS RECOMMENDED TO SQUEEZE THE TUBE WITH YOUR FINGERS. PRO TIP: FOR EXTREME VOLUMES, PREFER LAYERED APPLICATION AND POLYMERIZATION OF THE MATERIAL. RECOMMENDED APPLICATION THICKNESS – UP TO 3 MM PER LAYER.