Gel Polish for French Manicure

Color: Beige Texture: Camouflage Consistency: Medium F–Gel for French manicure F–07 – cool beige. FRENCH GEL POLISH is a high–quality semi–transparent gel polish of medium viscosity. It has increased viscosity, does not run into the sidewalls, and has no strong odor. It cures quickly under UV/LED lamps. The perfectly shaped, long, and flexible telescopic brush provides neat, even coverage of the nail plate in one or two coats. FRENCH GEL POLISH is suitable for both classic French manicures and as a standalone semi–transparent nude shade. Advantages of ADORE professional gel polish: – A wide range of popular shades – 3–stage product testing – Does not fade or change color – Pigment does not penetrate the base coat and leaves no marks on the nail plate. Application Technology: 1. Prepare the nail plate for gel polish application by performing a manicure and shaping the free edge of the nail. If using a remover, wipe off any residue with a damp wipe. 2. Degreasing: Degrease the nail plate mechanically (with a buff) and/or chemically (using PREPFINISH and a lint–free wipe. 3. Dehydration: Apply NAIL FRESHER to the entire nail and let it air dry until a whitish tint appears on the nail surface. 4. Bonding: Using a semi–dry brush, apply the acid–free primer ULTRABOND to the entire nail, staying 1mm away from the cuticle and sidewalls. Let it air dry for 15 seconds. 5. Base coat: Apply a medium layer of base coat. Cure the base coat in a UV lamp for 2–3 minutes or 60 seconds in an LED lamp. For leveling the nail plate with the base, it is recommended to use only bases with low acidity. 6. Color: Apply FRENCH GEL POLISH in a thin layer, avoiding strong pressure on the brush. With a second drop, evenly distribute the pigment on the surface of the nail plate. Cure each layer in a UV lamp for 2 minutes or 60 seconds in an LED lamp under low power mode. 7. Top coat: Seal with a top coat. Cure in a UV lamp for 2–3 minutes or 1 minute in an LED lamp. Allow the coating to cool completely. For leveling the nail plate with the top coat, it is recommended to use top coats of medium and thick consistency. When using a top coat with a sticky layer RUBBER TOP – let the coating cool, then remove the stickiness with PREPFINISH and a lint–free wipe. Strict adherence to the gel polish application technology is the key to long–lasting manicure wear without chipping, cracking, or peeling.