One Drop Gel for Nail Extensions

One Drop Gel No02 is a light pink nail extension gel with a vacuum pump. This mid–viscosity camouflage gel is intended for nail extensions, strengthening, and architecture correction for medium and longer nails. It can be used for: – extensions on tips and forms – strengthening and correcting nail architecture, both as a standalone product and in combination techniques with harder polymer materials. Advantages of One Drop Gel include a convenient mid–viscosity consistency, cold polymerization, and natural shades. Its main advantage is excellent self–leveling. The gel has medium pigmentation, with its natural tone camouflaging the transition from natural to artificial nails, adapting to the color of the nail plate. It is easy to use and store thanks to the vacuum dosing system: one press equals one drop. The volume of the drop can be adjusted by the pressure applied to the pump. Hardness: high. Viscosity: medium. Plasticity: low. Density: medium. Pigmentation: medium. Before use, be sure to remove the transparent silicone protective cap from the pump. Application technique: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail as desired. 1. Degreasing: degrease the nail mechanically (with a buff) and chemically (using PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish tint appears on the surface. 3. Bonding: if using the PRO BASE–BOND adhesive base, skip this step. 4. Base layer: apply a uniform base coat of PRO BASE–BOND, carefully capping the side walls and free edge. Cure the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the nail, stepping back 1mm from the cuticle. Over the uncured gel, apply a second leveling layer, following the basic principles of modeling with hard materials. Cure in a UV lamp for 2–4 minutes or in an LED lamp for 90 seconds. Remove the residual stickiness using PREPFINISH and a lint–free wipe. Use a 150/180 file for staged side shaping. PRO tips: – to facilitate material application, use tips or gel forms – to prevent lifting at the free edge, it is recommended to file the natural nail back 1–2mm from the inside. For extensions: prepare/set forms alternately on each finger. Create a thin base of the desired length and shape directly on the lower or upper form, and sculpt the nail architecture using gel. To create an arch, you can nudge the gel at the 7–12 second mark, depending on the type and power of the lamp. Continue curing the nail until the gel is fully polymerized for 60 seconds in an LED lamp or 3–4 minutes in a UV lamp. Remove sticky residue with PREPFINISH and a lint–free wipe. Use a 150/180 file for staged side shaping. PRO tip: apply gel at least 1mm away from the cuticle to avoid lifting in this area.