Adore Professional Product Category

Disposable gel–based tips for rapid nail extensions – extra long square with a C–shaped cut. Gel tips are a true revolution in the world of nail modeling. This unique product can replace forms for extensions, gel, or acrylic gel, simplifying and shortening the extension process to just 20–30 minutes. FUNKY GEL TIPS are thin yet strong and flexible tips made from modeling gel and plastic. They withstand everyday stress well, provide good cushioning, and visually resemble natural nails. Produced with a SOAK OFF formula, they can be removed either by soaking with GEL REMOVER or using a drill. The tips can be easily filed and their length adjusted. They are ideal for situations where extra length is needed. FUNKY GEL TIPS include 10 plates ranging from size 0 to 11 in a box, allowing you to choose the best shape and size for each nail. Tip sizes: largest 14. 25mm, smallest 6. 17mm. Advantages: High speed of application – extending one nail takes 1–2 minutes; Low cost – the cost of one extension will be no more than 1; Lightness – nails extended with gel tips feel weightless. Disadvantages: Require fitting to the shape or additional work with the natural nail for some types and sizes (arches, ramps. Usage technology: 1. Degrease the nail plate mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free wipe. 2. Apply dehydrator NAIL FRESHER on the entire nail and let air dry. If the nails do not develop a whitish tint, repeat dehydration. 3. Apply non–acid primer ULTRABOND with a semi–dry brush on the free edge of the nail plate. If using the highly adhesive MULTI BASE, this step can be skipped. 4. Apply flexible base coat MULTI BASE or FUNKY TIPS GLUE GEL across the entire natural nail. Cure in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 5. Select the required size and shape of FUNKY GEL TIPS for each nail. 6. Apply FUNKY TIPS GLUE GEL on the inside of the tip at the contact zone with the natural nail in a thin layer. 7. Press the tip onto the nail plate and place it under the lamp for a few seconds to set the glue. You can use a mini lamp or flashlight lamp for easier fixation. 8. Cure the nails in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds without pressing. 9. Shape the architecture using glue–gel, base, or gel. Cure the strengthening layer in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 10. File the nail into shape with a file no higher than 180 grit. 11. Apply color coating and seal it with a top coat, or use the FUNKY COLOR TOP. We recommend covering the inner side of the free edge of the tip with top coat to prevent it from clouding during wear.