One Drop Gel for Nail Extensions

One Drop Gel No11 is a white–milky thick camouflage gel for nail extension, strengthening, and architecture correction for medium to long nails. It is used for: – extensions on both top and bottom forms – strengthening and architecture correction as a mono product or in combination with harder polymer materials. Advantages of One Drop Gel include: convenient medium–thick consistency, cold polymerization, and natural shades. The primary advantage is excellent self–leveling. The gel has medium pigmentation, and its natural shade camouflages the transition from natural to artificial nail, blending with the nail plate color. It is user–friendly and easy to store thanks to the vacuum dispensing system: one press equals one drop. The drop size is adjustable by how hard you press the pump. Hardness: high. Viscosity: medium. Plasticity: low. Density: medium. Pigmentation: medium. Note that you need to remove the transparent protective silicone cap from the pump before use. Application Technology: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail. 1. Degreasing: degrease the nail plate mechanically (with a buffer) and chemically (with PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER on the entire nail, letting it air dry until a whitish hue appears on the surface. 3. Bonding: skip this step if using the adhesive base PRO BASE–BOND. 4. Base layer: apply an even layer of the base coat PRO BASE–BOND, carefully capping the side walls and free edge. Cure the base coat in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the nail plate, keeping a 1mm distance from the cuticle. On the uncured gel, apply a second leveling layer, following the basic principles of modeling with solid materials. Cure in a UV lamp for 2–4 minutes or in an LED lamp for 90 seconds. Remove any sticky residue with PREPFINISH and a lint–free wipe. Shape the nail using a 150/180 grit file. PRO Tips: – to facilitate material application, you can use upper forms or gel tips – to prevent lifting from the free edge, its recommended to file the natural nail from the inside by 1–2mm. Extension: prepare/install forms sequentially on each finger. Apply a thin base of desired length and shape directly on the lower or upper form, modeling the nail architecture with gel on top. To create an arch, you can gently lift the gel between the 7th and 12th seconds, depending on lamp type and power. Next, send the nail to the lamp for complete gel polymerization for 60 seconds in an LED lamp, or 3–4 minutes in a UV lamp. Remove any sticky residue with PREPFINISH and a lint–free wipe. Shape the nail with a 150/180 file. PRO Tip: apply the gel with a minimum 1mm distance from the cuticle to avoid material lifting in that area.