One Drop Gel for Nail Extensions

One Drop Gel No. 13 is a natural pink nail extension gel packaged in a vacuum pump jar. It is a medium–thick camouflage gel designed for extending, strengthening, and correcting the architecture of medium to long nails. It can be used for: – Extensions on both upper and lower forms – Strengthening and refining nail architecture as a standalone product or in combination with harder polymer materials. Advantages of One Drop Gel include: a convenient medium–thick consistency, cold polymerization, and natural shades. Its main advantage is excellent self–leveling. The gel’s medium pigmentation provides a natural shade that camouflages the transition from natural to artificial nails, adapting to the nail plate’s color. It is easy to use and store thanks to the vacuum dosing system: one press, one drop. The droplet size can be adjusted by the pressure applied to the pump. Hardness: high. Viscosity: medium. Plasticity: low. Density: medium. Pigmentation: medium. Note that before use, the transparent protective silicone cap must be removed from the pump. Application technology: 0. Prepare the nail plate: perform a manicure and shape the free edge as desired. 1. Degreasing: degrease the nail mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER to the entire nail and let it air dry until a whitish hue appears on the surface. 3. Bonding: skip this step if using adhesive base PRO BASE–BOND. 4. Base layer: apply a uniform layer of PRO BASE–BOND base coat, ensuring coverage of the sidewalls and free edge. Cure the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Strengthening: with a gel brush, apply a rubbing layer of gel over the entire surface of the nail, leaving a 1mm gap from the cuticle. On the uncured gel, apply a second leveling layer, keeping in mind the main principles of modeling with hard materials. Cure in a UV lamp for 2–4 minutes or in an LED lamp for 90 seconds. Remove the sticky residue using PREPFINISH and a lint–free wipe. Shape the form using a 150/180 grit file. PRO tips: – To facilitate material application, use upper forms or gel tips. – To prevent lifting from the free edge, it is recommended to taper the natural nail from the inside by 1–2mm. Extensions: prepare and place the forms sequentially on each finger. Apply a thin substrate of the desired length and shape directly onto the lower or upper form, modeling the nail architecture with gel. To create an arch, you can squeeze the gel at the 7–12 second mark, depending on the type and power of the lamp. Next, cure the nail until the gel is fully cured for 60 seconds in an LED lamp or 3–4 minutes in a UV lamp. Remove any sticky residue with PREPFINISH and a lint–free wipe. Shape the form using a 150/180 grit file. PRO advice: apply the gel with a minimum 1mm gap from the cuticle to avoid material lifting in this area.