Coverage Gel for Nail Extensions

TRANSLATION: SEMI–TRANSPARENT GEL IN A JAR WITH A VACUUM PUMP Cover Gel No02 – MILKY PINK This Cover Gel is a classic medium consistency camouflage gel designed for strengthening and salon nail extensions up to medium length. It is used for: – strengthening short nails using correction architecture without filing – creating medium length salon forms. The gel has a base–like consistency and controlled self–leveling, suitable for quick application. The semi–transparent natural shades gently camouflage nail imperfections, creating an ideal base for French nails. It is easy to use and store thanks to the vacuum dispensing system: one pump delivers one drop. The volume of the drop can be adjusted by the force applied to the pump. Benefits of Cover Gel: – Medium gel density allows for fast application in a conveyor–style method – Optimal viscosity – self–levels smoothly, leaving minimal need for further refinement – Semi–transparent coverage creates an elegant ‘Clean Girl’ effect. Hardness: 8/10 Density: 5/10 Viscosity: 4/10 Plasticity: 3/10 Pigmentation: 4/10 APPLICATION INSTRUCTIONS: 0. Prepare the nail plate: remove the previous coating, perform a manicure, and shape the free edge of the nail. 1. Degreasing: mechanically (with a 180/240 file) and chemically (using PrepFinish and a lint–free wipe) degrease the nail plate. 2. Dehydration: apply Nail Fresher to the entire nail, allowing it to dry in the air until a whitish hue appears on the surface. 3. Bonding: skip this step if using the PRO Base–Bond adhesive base. 4. Base Layer: apply an even layer of the PRO Base–Bond primer, ensuring to cover the side walls and free edge thoroughly. Cure the base layer in an LED lamp for 60 seconds. For convenience when applying the gel, remove the sticky layer from the base. 5. 1. Strengthening: – using a gel brush, apply a thin layer of gel over the entire surface of the nail plate, leaving a 1. 5mm gap from the cuticle – apply a second leveling layer on the uncured gel, following the basic principles of modeling with liquid gels – cure in an LED lamp for 90 seconds on the low power mode (24W) – remove residual stickiness with PrepFinish and a lint–free wipe – gently file the shape with a 150/180 file, hollowing out the natural nail inside by at least 1mm with a drill or file. 5. 2. Extension: – prepare/install forms one at a time on each finger – leaving a 1. 5mm gap from the cuticle, lay a thin base of the desired length and shape directly on the lower or upper form, then model the nail architecture with the gel – cure in an LED lamp for 90 seconds on the low power mode (24W) – remove residual stickiness with PrepFinish and a lint–free wipe – gently file the shape with a 150/180 file. NOTE: BEFORE USE, REMOVE THE TRANSPARENT PROTECTIVE CAP FROM THE PUMP.