Cover Gel for Nail Extensions

TRANSLATION: Semi–transparent gel in a jar with a vacuum pump, COVER GEL No06 – DENSE PINK. This camouflage gel has a classic medium consistency for strengthening and professional nail extensions up to medium length. Uses: – Strengthening short nails with correction edge techniques in no filing methods. – Extending salon–style medium–length nails. The gel has a consistency similar to a base with controlled self–leveling, suitable for quick work. The semi–transparent natural shades gently camouflage the nail plate (NP, creating an ideal base for French manicures. Easy to use and store thanks to the vacuum dispensing system: one push equals one drop. The volume of the drop is adjustable based on the pressing force on the pump. Advantages of COVER GEL: – Medium viscosity allows for fast assembly line work. – Optimal thickness – self–levels smoothly, leaving minimal for further refinement. – Semi–transparent finish – creates an elegant clean girl effect. Properties: – Hardness: 8/10 – Density: 5/10 – Viscosity: 4/10 – Plasticity: 3/10 – Pigmentation: 4/10 APPLICATION INSTRUCTIONS: 0. Prepare the nail plate: remove previous coating, perform manicure, and shape the free edge of the nail. 1. Degreasing: degrease the NP mechanically (with a 180/240 file) and chemically (using PrepFinish and a lint–free wipe. 2. Dehydration: apply Nail Fresher to the entire nail, allowing it to air dry until a whitish hue appears on the NP surface. 3. Bonding: skip this step if using the PRO Base–Bond adhesive base. 4. Base layer: apply an even layer of PRO Base–Bond primer, carefully covering the side walls and free edge. Cure the base coat in a LED lamp for 60 seconds. For ease of further gel application, remove the sticky layer from the base. 5. 1. Strengthening: – using a gel brush, apply a thin layer of gel over the entire NP surface, retreating from the cuticle by 1. 5mm. – apply a second leveling layer over the uncured gel, considering the basic principles of modeling with liquid gels. – cure in a LED lamp for 90 seconds on low power mode (24W. – remove residual stickiness with PrepFinish and a lint–free wipe. – using a 150/180 file, mat the form systematically, removing at least 1mm of the natural nail from inside using a bur or file. 5. 2. Extension: – prepare/set forms sequentially on each finger. – retreating from the cuticle area by 1. 5mm, apply a thin substrate of desired length and shape directly onto the underlying or upper form, modeling the architecture of the nail with the gel. – cure in a LED lamp for 90 seconds on low power mode (24W. – remove residual stickiness with PrepFinish and a lint–free wipe. – using a 150/180 file, mat the form systematically. NOTE: BEFORE BEGINNING USE, REMOVE THE TRANSPARENT PROTECTIVE CAP FROM THE PUMP.