Cover Gel for Nail Extensions

TRANSLATED TEXT: Semi–transparent Gel in a Vacuum Pump Jar COVER GEL No07 – BEIGE Cover Gel – a classic medium consistency camouflage gel for strengthening and salon nail extensions to medium length. It is used for: strengthening short nails with architectural correction techniques, in a dust–free salon nail extension technique. The gel has a base–like consistency and controlled self–leveling, suitable for quick applications. The semi–transparent natural shades gently camouflage nails, creating a perfect foundation for French manicures. It is user–friendly and easy to store thanks to the vacuum dispensing system: one press, one drop. The droplet size is adjustable by the pressure applied on the pump. Benefits of Cover Gel: The medium density of the gel allows for quick conveyor–style application. Optimal viscosity – self–leveling smoothly, leaving minimal need for further refinement. Semi–transparent coverage creates a sophisticated Clean Girl effect. Hardness: 8/10 Density: 5/10 Viscosity: 4/10 Plasticity: 3/10 Pigmentation: 4/10 HOW TO APPLY THE GEL: 0. Prepare the nail plate: remove previous coating, perform a manicure, shape the free edge of the nail as desired. 1. Degrease: mechanically (with a 180/240 file) and chemically (using PrepFinish and a lint–free wipe) degrease the nail plate. 2. Dehydrate: apply Nail Fresher to the entire nail and let it air dry until a whitish hue appears on the nail surface. 3. Bonding: skip this step if using PRO Base–Bond adhesive base. 4. Base layer: apply an even layer of PRO Base–Bond primer, carefully capping the sidewalls and free edge. Cure the base in an LED lamp for 60 seconds. For convenience, remove the tacky layer from the base before applying gel. 5. 1. Strengthening: – with a gel brush, apply a thin layer of gel over the entire nail surface, leaving a 1. 5mm margin from the cuticle – apply a second leveling layer over the uncured gel, adhering to the main principles of sculpting with liquid gels – cure in an LED lamp for 90 seconds in low power mode (24W) – remove residual tackiness with PrepFinish and a lint–free wipe – file form gradually using a 150/180 grit file, exposing natural nail from within by at least 1mm with a drill or file. 5. 2. Extensions: – prepare/install forms sequentially on each finger – with a 1. 5mm margin from the cuticle area, lay a thin substrate of the desired length and shape directly on the lower or upper form, sculpt the nail architecture with gel – cure in an LED lamp for 90 seconds in low power mode (24W) – remove residual tackiness with PrepFinish and a lint–free wipe – file form gradually using a 150/180 grit file. NOTE: BEFORE BEGINNING USE – REMOVE THE TRANSPARENT PROTECTIVE CAP FROM THE PUMP.