Loli Poly Base Colorful

Strengthening Poly Base No. 12 – Blue LOLI POLY BASE – a colored poly base in delicate summer shades for quick leveling and strengthening of nails. A hybrid product of gel–lacquer and gel systems, this colored base has poly gel properties. It is used as a standalone color coating for strengthening medium–length nails in the gel leveling technique. It can be used for minor extensions. The consistency is medium–thick with moderate viscosity for fast application. It lays down in one layer, easily leveling out when the hand is turned upside down. The maximum allowable material thickness at the apex is 1mm. It has no sharp odor and does not clog the drill bit. The main advantage of LOLI POLY BASE is that it reduces the master’s working time. Consistency: thick. Polymerization speed: medium. Hardness: medium. Plasticity: medium. Pigmentation: medium. Acidity: low. Application technology: 0. Prepare the nail plate for coating: perform a manicure, shaping the free edge of the nail as needed. If using a remover, wipe off its residue with a damp cloth. 1. Dehydrate: degrease the nail plate mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free cloth. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish tint appears on the surface of the nail plate. 3. Bonding: using a semi–dry brush, apply the acid–free primer ULTRABOND to the entire nail, leaving 1mm away from the cuticle and side ridges. Allow it to air dry for 15 seconds; if using MULTI SLIM BASE or PRO BASE BOND, skip this step. 4. Base Layer: apply a thin, even layer of the MULTI SLIM / PRO BASE BOND base coat. Polymerize the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Color: apply LOLI POLY BASE evenly, add a drop, and level it out using the no–file technique. Polymerize the poly base in a UV lamp for 2–4 minutes or in an LED lamp for 60–90 seconds. File the free edge and shape the tip if necessary. 6. Finish: seal the coating with a topcoat. Polymerize in a UV lamp for 2–3 minutes or in an LED lamp for at least 1 minute.