3D Funky Volume Gel for Designs

VOLUMIZING DESIGN GEL – RED STAINED 3D Funky Art Gel – a colored gel without a sticky layer for volumetric designs in a tube. It is used for: – Korean–style designs: transparent flowers, waves, droplets – sculpting volumetric elements straight from the tube – increasing design variability: rub in powders, pigments, glitters onto the cured gel. Advantages of 3D Funky Art Gel: – can be used at any stage of coverage, including over the top coat – does not require a top coat – easy to control the thickness and volume of the material by adjusting the pressure on the tube – easily filed or drilled away. Consistency: thick. Curing speed: medium. After curing: rigid. Viscosity: low. Pigmentation: high. HOW TO APPLY 3D GEL: 1. Prepare the nail and apply base/gel/gellack/color/top coat. 2. Design: squeeze the desired amount of gel onto the nail from the tube. Use a liner to refine the design if necessary. Cure under a UV/LED lamp for 120/90 seconds. 3. Finish: If you applied color, glitter, or other decor on top of the gel, seal with a top coat. Cure under a UV/LED lamp for at least 1 minute. WARNING: BEFORE USING COLORED GEL, IT IS RECOMMENDED TO SQUEEZE THE TUBE WITH YOUR FINGERS. PRO TIP: FOR EXTREME VOLUMES, PREFER LAYERED APPLICATION AND CURING OF THE MATERIAL. RECOMMENDED APPLICATION THICKNESS – UP TO 3 MM PER LAYER.