Gel Polish for French Manicure

Color: Beige Texture: Camouflage Consistency: Medium The F–12 French Gel Polish in warm coffee is a high–quality, semi–transparent medium–density gel polish with an improved soft formula. It is suitable for both classic French manicures and as a standalone semi–transparent nude shade. The gel polish has increased viscosity, does not seep into the cuticles, and has no strong odor. It has optimal curing speed under UV/LED lamps. The ideal shape, length, and elasticity of the telescopic brush ensure neat, even coverage of the nail plate in one or two coats. Advantages of ADORE professional gel polish: – A wide palette of popular shades – Three–stage product testing – Does not fade or change color – Pigment does not penetrate the base coat and leaves no residue on the nail plate. Application Technology: 0. Prepare the nail plate for gel polish application: perform a manicure and shape the free edge of the nail. If using a remover, remove its residues with a damp wipe. 1. Dehydrate: mechanically (using a buffer) and chemically (with PREPFINISH and a lint–free wipe) dehydrate the nail plate. 2. Dehydrogenation/Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish tint appears on the nail surface. 3. Bonding: with a semi–dry brush, apply the acid–free primer ULTRABOND to the entire nail, leaving a 1 mm gap from the cuticle and sidewalls. Allow to air dry for 15 seconds. 4. Base Coat: apply a medium layer of base coat. Cure the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. For leveling the nail plate, we recommend using only bases with low acidity. 5. Color: apply FRENCH GEL POLISH in 1–2 layers, avoiding excessive pressure on the brush. Cure in a UV lamp for 2 minutes or in an LED lamp for 60 seconds. 6. Top Coat: seal the coating with a top. Cure in a UV lamp for 2–3 minutes or in an LED lamp for 1 minute. Allow the coating to cool completely. For leveling the nail plate with the top, we recommend using tops of medium–thick and thick consistency. If using a top with a sticky layer RUBBER TOP, let the coating cool, then remove the stickiness with PREPFINISH and a lint–free wipe. Precise adherence to the gel polish application technology is the key to long–lasting wear of the manicure without chips, cracks, and peeling.