Cover Gel for Nail Extensions

TRANSLATION OF THE TEXT: TRANSLUCENT GEL IN A JAR WITH VACUUM PUMP COVER GEL No08 – CARAMEL Cover Gel – a classic ‘medium’ consistency camouflage gel for strengthening and salon nail extensions up to medium length. Used for: strengthening short nails with a correction edge in the ‘no filing’ technique, salon–style medium–length extensions. The gel has a base–like consistency and controlled self–leveling, suitable for fast work. The translucent natural shades gently camouflage the natural nail, creating a perfect foundation for French manicures. Convenient to use and store thanks to the vacuum dosing system: one pump equals one drop. The drop size is regulated by the pressure applied to the pump. Advantages of Cover Gel: – Medium gel density allows for quick conveyor–style work. – Optimal viscosity – self–levels smoothly, leaving minimal for further refinement. – Translucent coverage – creates an exquisite Clean Girl effect. Hardness: 8/10, Density: 5/10, Viscosity: 4/10, Plasticity: 3/10, Pigmentation: 4/10. HOW TO APPLY THE GEL: 0. Prepare the nail plate: remove the previous coating, perform a manicure, and shape the free edge of the nail. 1. Dehydrate: mechanically (with a 180/240 file) and chemically (using PrepFinish and a lint–free wipe) dehydrate the nail plate. 2. Dehydration: apply Nail Fresher to the entire nail, allowing it to air dry until a whitish hue appears on the nail surface. 3. Bonding: skip this step when using the PRO Base–Bond adhesive base. 4. Base Coat: apply a uniform layer of PRO Base–Bond base coat, carefully covering the side walls and free edge. Cure the base coat in an LED lamp for 60 seconds. For convenience in further gel application, remove the tacky layer from the base. 5. 1. Strengthening: – using a gel brush, apply a thin layer of gel over the entire nail surface, leaving a 1. 5 mm gap from the cuticle – apply a second leveling layer over the uncured gel, following the basic modeling principles with liquid gels – cure in an LED lamp – 90 seconds on a low–power 24W setting – remove residual tackiness using PrepFinish and a lint–free wipe – file the form step–by–step with a 150/180 grit file – file down the natural nail inside by at least 1mm with a drill or file. 5. 2. Extension: – prepare/install forms one at a time on each finger – with a 1. 5 mm gap from the cuticle area, lay a thin substrate of the desired length and shape directly on the lower or upper form, modeling the nail architecture with gel – cure in an LED lamp – 90 seconds on a low–power 24W setting – remove residual tackiness using PrepFinish and a lint–free wipe – file the form step by step with a 150/180 grit file. NOTE BEFORE USE – REMOVE THE TRANSPARENT PROTECTIVE CAP FROM THE PUMP.