Acid Primer

Acid Primer 8ml Acid Primer ACID PRIMER is a product that creates/improves adhesion between the surface of the natural nail and polymer material. It is used as the third step in preparing the nail plate for modeling and strengthening systems, as well as for wet nail plates in gel–lacquer systems. It is applied after the dehydrator before applying the base coat. Recommended for use with polymer materials that have low acidity. For high–acidic base coatings, primer use should be avoided to prevent excessive adhesion (MULTI BASE, RUBBER BASE) or applied only to areas most prone to lifting (free edge. pH: 5. 5 Application technology: 1. Prepare the nail plate for gel–lacquer application: perform a manicure and shape the free edge of the nail. If using a remover, remove residue with a damp wipe. 2. Degreasing: mechanically (using a buffer) and chemically (using PREPFINISH and a lint–free wipe) degrease the nail plate. 3. Dehydration: apply NAIL FRESHER in a thin layer over the entire nail surface; for wet hands, apply to the nail and sidewalls. Allow to air dry until a whitish tint appears on the nail surface. Repeat if necessary. 4. Bonding: using a semi–dry brush, apply ACID PRIMER to the center of the nail plate and allow it to spread evenly. Try to apply the product in 1–2 strokes to avoid excessive adhesion, holding the brush at a 15–degree angle to the plate. Allow to air dry until a silvery tint appears, then proceed to apply the base coat. In case of contact with the skin, remove any residue with a damp wipe.