Colorful Loli Poly Base

Reinforcing Poly Base No01 – Lilac LOLI POLY BASE – a colored poly base in soft summer shades designed for quick leveling and strengthening of nails. This hybrid product combines gel polish and gel system characteristics, featuring a color base with poly gel properties. It can be used as a standalone color coating to strengthen medium–length nails using gel leveling techniques, and can also be applied for nail lengthening of minimal size. It has a convenient medium–thick consistency with moderate viscosity for efficient application, applied in one layer, and it self–levels well when the hand is inverted. The maximum allowable thickness at the apex is 1mm. It has no sharp odor and does not clog the drill bit. The main advantage of LOLI POLY BASE is that it reduces the technician’s work time. Consistency: thick. Polymerization speed: average. Hardness: average. Plasticity: average. Pigmentation: average. Acidity: low. Application technology: 0. Prepare the nail plate for coating: perform a manicure, shape the free edge of the nail. If using a remover, wipe off its residue with a damp wipe. 1. Degreasing: degrease the nail plate mechanically (with a buff) and chemically (with PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish tint appears on the surface. 3. Bonding: with a semi–dry brush, apply an acid–free primer ULTRABOND evenly, staying 1mm away from the cuticle and side walls. Allow it to air dry for 15 seconds; skip this step if using MULTI SLIM BASE or PRO BASE BOND. 4. Base coat: apply a thin, even layer of MULTI SLIM / PRO BASE BOND. Polymerize the base coating in a UV lamp for 2–3 minutes or 60 seconds in an LED lamp. 5. Color: apply LOLI POLY BASE in an even layer, add a drop and smooth it using the no–file technique. Polymerize the poly base in a UV lamp for 2–4 minutes or 60–90 seconds in an LED lamp. Buff the free edge and file the underside if necessary. 6. Finish: secure the coating with a top coat. Polymerize in a UV lamp for 2–3 minutes or for at least 1 minute in an LED lamp.