Colorful Loli Poly Base

Strengthening Polybase No10 – Salad LOLI POLY BASE – is a colored polybase in delicate summer shades designed for quick leveling and strengthening of nails. This hybrid product combines gel polish and gel system properties, offering a colored base with polygel characteristics. It can be used as an independent color coating for strengthening medium–length nails using the gel leveling technique. It can also be employed for minor length enhancements. The product has a convenient medium–thick consistency with moderate viscosity for quick application. It levels well in a single layer and maintains a droplet form when the hand is flipped. The maximum permissible thickness at the apex is 1mm. It has no strong odor and does not clog the drill bit. The main advantage of LOLI POLY BASE is that it reduces the technician’s working time. Consistency: thick. Polymerization speed: medium. Hardness: medium. Plasticity: medium. Pigmentation: medium. Acidity: low. Application technology: 0. Prepare the nail plate for coverage: perform a manicure, shape the free edge of the nail as desired. If a remover is used, wipe off any residue with a damp cloth. 1. Degreasing: degrease the nail plate both mechanically (using a buff) and chemically (with PREPFINISH and a lint–free cloth. 2. Dehydration: apply NAIL FRESHER on the entire nail and allow it to dry in the air until a whitish hue appears on the surface of the nail plate. 3. Bonding: using a semi–dry brush, apply the acid–free primer ULTRABOND on the entire nail, keeping 1mm away from the cuticle and sidewalls. Let it air dry for 15 seconds; skip this step if using MULTI SLIM BASE or PRO BASE BOND. 4. Base coat: apply a thin, even layer of MULTI SLIM / PRO BASE BOND base coat. Polymerize the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Color: apply LOLI POLY BASE in an even layer, add a droplet, and level using the dust–free technique. Polymerize the polybase in a UV lamp for 2–4 minutes or in an LED lamp for 60–90 seconds. File the free edge, and shape if necessary. 6. Finish: seal the coating with a top coat. Polymerize in a UV lamp for 2–3 minutes or in an LED lamp for 1 minute.