Cover Gel for Nail Extensions

TRANSLATED TEXT: TRANSLUCENT GEL IN A JAR WITH A VACUUM PUMP – COVER GEL No05 – NUDES. Cover Gel is a camouflaging gel with a classic medium consistency designed for strengthening and salon nail extensions up to medium length. It is used for: – Strengthening short nails with architectural correction in an unfiled technique. – Salon–style medium–length extensions. The gel has a viscosity similar to a base, allowing for controlled self–leveling, suitable for quick applications. The translucent natural shades softly camouflage natural nails, creating an ideal base for French manicures. It is convenient to use and store thanks to the vacuum dispensing system: one press equals one drop. The droplet volume can be adjusted by the pressure applied to the pump. Advantages of Cover Gel: – Medium gel density allows for fast, assembly–line work. – Optimal viscosity – self–levels smoothly, leaving minimal need for further refinement. – Translucent finish creates an exquisite Clean girl effect. Hardness: 8/10 Density: 5/10 Viscosity: 4/10 Plasticity: 3/10 Pigmentation: 4/10 APPLICATION INSTRUCTIONS: 0. Prepare the nail plate: remove any previous coating, perform a manicure, and shape the free edge of the nail. 1. Degreasing: mechanically (with a 180/240 file) and chemically (using PrepFinish and a lint–free wipe) degrease the nail plate. 2. Dehydration: apply Nail Fresher on the entire nail, allowing it to air dry until a whitish sheen appears on the surface. 3. Bonding: Skip this step if using the adhesive base PRO Base–Bond. 4. Base coat: apply a uniform coat of the PRO Base–Bond primer, thoroughly covering the sidewalls and free edge. Cure the base coat in an LED lamp for 60 seconds. For convenience in further gel application, remove the sticky layer from the base. 5. 1. Strengthening: – using a gel brush, apply a thin layer of gel over the entire surface of the nail, with a 1. 5mm gap from the cuticle. – apply a second leveling layer over the uncured gel, considering the main principles of modeling with liquid gels. – cure in an LED lamp for 90 seconds at a reduced power of 24W. – remove residual tackiness with PrepFinish and a lint–free wipe. – use a 150/180 file to perform step–by–step refinement of the form, filing the natural nail from the inside by at least 1mm with a drill or file. 5. 2. Extension: – prepare/install forms sequentially on each finger. – with a 1. 5mm gap from the cuticle area, lay a thin base of the desired length and shape directly on the bottom or top form, modeling the nail architecture with gel. – cure in an LED lamp for 90 seconds at a reduced power of 24W. – remove residual tackiness with PREPFINISH and a lint–free wipe. – use a 150/180 file to perform step–by–step refinement of the form. PLEASE NOTE BEFORE USING – REMOVE THE TRANSPARENT PROTECTIVE CAP FROM THE PUMP.