Cover Gel for Nail Extensions

TRANSLUCENT GEL IN A JAR WITH VACUUM PUMP COVER GEL No03 – NATURAL PINK. Cover Gel is a camouflaging gel with a classic medium consistency, designed for strengthening and salon nail extensions up to medium length. It is used for: strengthening short nails using the correction edge technique in a dust–free application, and salon–style extensions of medium length. The gel has a consistency similar to base gel with controlled self–leveling, making it suitable for quick application. The translucent natural shades gently camouflage the nails, creating an ideal base for French manicures. It is convenient to use and store due to the vacuum dosing system: one push delivers one drop. The drop size is adjustable by the pressure applied to the pump. Advantages of Cover Gel: The medium viscosity allows for quick conveyor–belt–style application. Optimal viscosity allows for smooth self–leveling, requiring minimal additional finishing. The translucent finish creates an elegant Clean Girl effect. Hardness: 8/10, Density: 5/10, Viscosity: 4/10, Plasticity: 3/10, Pigmentation: 4/10. HOW TO APPLY THE GEL: 0. Prepare the nail plate: remove the previous coating, carry out a manicure, and shape the free edge of the nail. 1. Degreasing: Degrease nails mechanically (with a 180/240 file) and chemically (using PrepFinish and a lint–free wipe. 2. Dehydration: Apply Nail Fresher to the entire nail, allowing it to air dry until a whitish hue appears on the nail surface. 3. Bonding: Skip this step if using PRO Base–Bond adhesive base. 4. Base layer: Apply a uniform layer of PRO Base–Bond base coat, carefully covering the sidewalls and free edge. Cure the base coat in an LED lamp for 60 seconds. For ease in the next gel application, remove the sticky layer from the base. 5. 1. Strengthening: With a gel brush, apply a thin layer of gel over the entire nail surface, retreating 1. 5 mm from the cuticle. Over the uncured gel, apply a second leveling layer, following the fundamental principles of modeling with liquid gels. Cure in an LED lamp for 90 seconds on reduced power (24W. Remove residual stickiness with PrepFinish and a lint–free wipe. Using a 150/180 file, gradually refine the form, filing the natural nail from the inside by at least 1 mm with a bur or file. 5. 2. Extensions: Prepare/set forms on each finger sequentially. With 1. 5 mm retreat from the cuticle area, apply a thin base of the desired length and shape directly onto the lower or upper form, modeling the nail architecture with gel. Cure in an LED lamp for 90 seconds on reduced power (24W. Remove residual stickiness with PREPFINISH and a lint–free wipe. Using a 150/180 file, gradually refine the form. NOTE: BEFORE BEGINNING USE, REMOVE THE TRANSPARENT PROTECTIVE CAP FROM THE PUMP.