Gel Nail Polish with Glitter

Color: pink Texture: shimmer Consistency: thick Gel polish No258 – pink candy with micro shimmer. The high–quality ADORE professional gel polish of medium thickness has a rich, dense pigment that provides an even coverage of the nail plate in one or two coats, while the fine shimmer adds a light sparkling shine to the finish. It does not seep into the cuticles and has no strong odor. It features an optimal curing speed in UV / LED lamps. The gel polish pigment does not penetrate the base coat and leaves no residue on the nail plate. Suitable for technicians of any level. Due to its convenient consistency and dense pigment, the gel polish can also be used for designs. Advantages of ADORE professional gel polish: A safe 9–free formula A current palette of carefully selected shades 3–stage product testing Compatible with products from other brands. To maintain the richness of bright and vibrant gel polishes, they should be topped with a UV–filtered topcoat RUBBER TOP/STOP SCRATCH TOP, and dark gel polishes should be capped with a topcoat without UV filters TOP NO WIPE/LOCK IN TOP to prevent color distortion. Application Technology: 0. Prepare the nail plate for gel polish application: perform a manicure, shape the free edge of the nail. If using a remover, wipe away its residue with a moist wipe. 1. Degreasing: mechanically (using a buff) and chemically (using PREPFINISH and a lint–free wipe, degrease the nail plate. 2. Dehydration: apply NAIL FRESHER to the entire nail and let it air dry until the surface shows a whitish tint. 3. Bonding: using a semi–dry brush, apply the acid–free primer ULTRABOND to the entire nail, retreating 1mm from the cuticle and sidewalls. Allow to air dry for 15 seconds. 4. Base layer: apply a medium layer of base coat. Cure the base coat in a UV lamp for 2–3 minutes, in an LED lamp for 60 seconds. For leveling the nail plate, we recommend only using bases with low acidity. 5. Color: apply the gel polish in 1–2 thin layers. Cure each layer in a UV lamp for at least 2 minutes, in an LED lamp for at least 30 seconds. 6. Top coat: seal the finish with a topcoat. Cure in a UV lamp for 2–3 minutes, in an LED lamp for 1 minute. For leveling the nail plate with the topcoat, we recommend using topcoats of medium to thick consistency. When using a topcoat with a sticky layer RUBBER TOP, let the finish cool down, then remove the stickiness using PREPFINISH and a lint–free wipe. Accurate adherence to the gel polish application technology is the key to long–lasting manicure without chips, cracks, or lifting.