Loli Color Poly Base

Strengthening Poly Base No03 – whitish–pink LOLI POLY BASE – a colored poly base in delicate summer shades for quick leveling and strengthening of nails. It is a hybrid product of gel polish and gel systems, with the properties of a poly gel. It can be used as an independent colored coating for strengthening medium–length nails through gel leveling technique. It may also be used for extending small lengths. The consistency is a convenience of medium thickness with moderate viscosity for fast application. It is applied in one layer and levels well in a drop when the hand is inverted. The maximum permissible thickness at the apex is 1 mm. It has no sharp odor and does not clog the drill. The main advantage of LOLI POLY BASE is that it reduces the time needed by the technician. Consistency: thick. Polymerization speed: medium. Hardness: medium. Plasticity: medium. Pigmentation: medium. Acidity: low. Application technology: 0. Preparing the nail plate for coating: perform a manicure, shape the free edge of the nail as needed. If a remover is used, remove residues with a damp cloth. 1. Degreasing: degrease the nail plate mechanically (with a buff) and chemically (with PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER all over the nail, allowing it to air dry until a whitish hue appears on the nail plate surface. 3. Bonding: using a semi–dry brush, apply acid–free primer ULTRABOND all over the nail, keeping a 1 mm distance from the cuticle and side rollers. Allow to air dry for 15 seconds; if using MULTI SLIM BASE or PRO BASE BOND, skip this step. 4. Base layer: apply a thin, even coat of MULTI SLIM / PRO BASE BOND base cover. Polymerize the base coating in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 5. Color: apply LOLI POLY BASE in an even layer, add a drop, and level it using the no–file technique. Polymerize the poly base in a UV lamp for 2–4 minutes, or in an LED lamp for 60–90 seconds. File the free edge as needed. 6. Finish: seal the coating with top coat. Polymerize in a UV lamp for 2–3 minutes, or in an LED lamp for at least 1 minute.