One Drop Gel for Nail Extensions

One Drop Gel No07 is a light beige nail extension gel in a vacuum pump jar. This medium–thick camouflage gel is designed for nail enhancement, strengthening, and architecture correction for medium to long nails. It is suitable for: – extensions using forms – strengthening and architecture correction as a standalone product or in combination with firmer polymer materials. Advantages of One Drop Gel include its convenient medium–thick consistency, cold polymerization, and natural shades. Its main feature is excellent self–leveling. The gel has medium pigmentation, and its natural shade camouflages the transition from natural to artificial nails, adapting to the color of the nail plate. It’s easy to use and store thanks to the vacuum dispensing system: one push yields one drop, with the drop volume adjustable by the pressure applied to the pump. Hardness: high. Viscosity: medium. Plasticity: low. Density: medium. Pigmentation: medium. Note: before use, remove the clear silicone protective cap from the pump. Application Technology: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail. 1. Degreasing: degrease the nail plate mechanically (with a buff) and chemically (with PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish tint appears on the surface of the nail. 3. Bonding: skip this step if using the adhesive base PRO BASE–BOND. 4. Base layer: apply an even layer of the PRO BASE–BOND foundation, ensuring to encapsulate the side walls and free edge. Cure the base in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Strengthening: using a gel brush, apply a working layer of gel over the entire surface of the nail, leaving a 1mm gap from the cuticle. Apply a second leveling layer over the uncured gel, keeping in mind the main modeling principles with hard materials. Cure in a UV lamp for 2–4 minutes or in an LED lamp for 90 seconds. Remove the sticky residue with PREPFINISH and a lint–free wipe. File with a 150/180 grit file for a gradual shaping of the form. PRO Tips: – to make material application easier, you can use upper forms or gel tips – to prevent lift from the free edge, it’s recommended to file the natural nail from the inside by 1–2mm. Extensions: prepare and place the forms one by one on each finger. Lay a thin base of the desired length and shape directly on the lower or upper form, then model the nail architecture with gel. To create an arch, squeeze the gel at the 7–12 second mark, depending on the type and power of the lamp. Then place the nail under the lamp until the gel is fully cured for 60 seconds in an LED lamp or 3–4 minutes in a UV lamp. Remove any residual stickiness with PREPFINISH and a lint–free wipe. File with a 150/180 grit file for gradual shaping of the form. PRO Tip: apply the gel with at least a 1mm gap from the cuticle to avoid material lift in this area.