One Drop Gel for Nail Extensions

One Drop Gel No09 is a milky–beige medium–thick camouflage gel for nail enhancement, strengthening, and architectural correction of medium to long nails. It is used for: – Enhancing on dual forms – Strengthening and correcting nail architecture as a standalone product and in combination with harder polymer materials. Advantages of One Drop Gel: – Convenient medium–thick consistency – Cold polymerization – Natural shades Its main advantage is excellent self–leveling. The gel has medium pigmentation, with the natural shade camouflaging the transition from natural to artificial nails, adapting to the color of the nail plate. The vacuum dispensing system makes it easy to use and store, providing one drop per press. The drop volume can be adjusted by the pressure applied to the pump. Hardness: High. Viscosity: Medium. Plasticity: Low. Density: Medium. Pigmentation: Medium. Note that before use, the clear silicone protective cap must be removed from the pump. Application technology: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail as needed. 1. Degreasing: Degrease the nail plate mechanically (with a buff) and chemically (using PREPFINISH and a lint–free wipe. 2. Dehydration: Apply NAIL FRESHER to the entire nail and allow it to air dry until a whitish hue appears on the surface. 3. Bonding: If using PRO BASE–BOND adhesive base, skip this step. 4. Base layer: Apply a uniform layer of PRO BASE–BOND base coat, thoroughly covering the sidewalls and free edge. Polymerize the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Reinforcement: Use a gel brush to apply a thinner layer of gel across the entire surface of the nail, keeping a 1mm margin from the cuticle. Apply a second leveling layer over the uncured gel, following the basic principles of solid material modeling. Polymerize in a UV lamp for 2–4 minutes or in an LED lamp for 90 seconds. Remove the sticky residue with PREPFINISH and a lint–free wipe. Use a 150/180 grit file to shape the form step–by–step. Pro tips: – To facilitate material application, upper forms or gel tips can be used. – To prevent lifting from the free edge, recommend filing the natural nail from the inside by 1–2mm. Nail extension: prepare/install forms sequentially on each finger. Apply a thin base of the desired length and shape directly onto the lower or upper form, modeling the nail architecture using the gel. To create an arch, the gel can be adjusted at 7–12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp for complete gel polymerization for 60 seconds under the LED lamp or 3–4 minutes under the UV lamp. Remove the sticky residue with PREPFINISH and a lint–free wipe. Follow with a step–by–step shaping using a 150/180 file. Pro tip: Apply the gel with a minimum 1mm margin from the cuticle to avoid material lifting in this area.