One Drop Gel for Nail Extensions

One Drop Gel No03 is a peach–pink building gel in a jar with a vacuum pump. This medium–thick camouflage gel is ideal for nail extensions, strengthening, and correcting the architecture of medium and longer nails. It is used for: – Extensions on forms (both upper and lower) – Strengthening and correcting nail architecture, either as a mono product or in combination techniques with firmer polymer materials. Advantages of One Drop Gel: – Convenient medium–thick consistency – Cold polymerization – Natural shades The main benefit is excellent self–leveling. The gel has medium pigmentation, and its natural shade camouflages the transition from natural to artificial nail, adapting to the nail plate color. It is easy to use and store, thanks to the vacuum dosing system: one push equals one drop. The size of the drop is adjustable based on the pressing force on the pump. Hardness: high. Viscosity: medium. Plasticity: low. Density: medium. Pigmentation: medium. Note that before first use, remove the clear protective silicone cap from the pump. Application Technology: 0. Prepare the nail plate: perform a manicure and shape the free edge as needed. 1. Degreasing: degrease the nail mechanically (using a buff) and chemically (using PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER to the entire nail, allow to air dry until a whitish hue appears on the surface. 3. Bonding: skip this step if using the adhesive base PRO BASE–BOND. 4. Base Coat: apply a uniform layer of the PRO BASE–BOND base coat, ensuring to cover the sidewalls and free edge thoroughly. Cure the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Strengthening: with a gel brush, apply a rubbing layer of gel over the entire nail surface, leaving a 1mm margin from the cuticle. Apply a second leveling layer over the uncured gel, following the basic principles of modeling with hard materials. Cure in a UV lamp for 2–4 minutes or in an LED lamp for 90 seconds. Remove the sticky residue with PREPFINISH and a lint–free wipe. Shape the form with a 150/180 grit file. PRO Tips: – To facilitate material application, you can use upper forms or gel tips. – To prevent lifting at the free edge, it is recommended to file the natural nail from the inside by 1–2mm. Extensions: Prepare/set the forms on each finger sequentially. Place a thin base of the desired length and shape directly on the lower or upper form, and model the nail architecture with gel on it. To create the arch, you can push the gel at the 7–12 second mark, depending on the lamp type and power. Then, send the nail under the lamp for full gel polymerization for 60 seconds in an LED lamp or 3–4 minutes in a UV lamp. Remove the sticky residue with PREPFINISH and a lint–free wipe. Shape the form with a 150/180 grit file. PRO Tip: Apply the gel, leaving at least 1mm away from the cuticle to avoid material lifting in that area.