One Drop Gel for Nail Extensions

One Drop Gel No10 – Coffee, a medium–thick camouflage gel in a vacuum pump jar, is ideal for nail extension, strengthening, and correcting the architecture of medium to longer nails. It is used for: – extensions on upper and lower forms – strengthening and correcting nail architecture as a mono–product or in combination with harder polymer materials. Advantages of One Drop Gel: Convenient medium–thick consistency, cold polymerization, and natural shades. The main benefit is excellent self–leveling. The gel features medium pigmentation, and its natural shade camouflages the transition from natural to artificial nails, adapting to the color of the nail plate. Easy to use and store thanks to the vacuum dispensing system: one push equals one drop, with the drop volume adjustable by the pressure applied. Hardness: high. Viscosity: medium. Plasticity: low. Density: medium. Pigmentation: medium. Note: Before use, remove the transparent protective silicone cap from the pump. Application technology: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail. 1. Degreasing: degrease the nail plate mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free cloth. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish hue appears. 3. Bonding: if using the adhesive base PRO BASE–BOND, skip this step. 4. Base coat: apply an even layer of the PRO BASE–BOND base coat, carefully covering the side walls and free edge. Cure the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Strengthening: using a gel brush, apply a thin layer of gel over the entire nail surface, leaving 1mm distance from the cuticle. On the uncured gel, apply a second leveling layer, following the basic principles of modeling with solid materials. Cure in a UV lamp for 2–4 minutes or in an LED lamp for 90 seconds. Remove residual tackiness with PREPFINISH and a lint–free cloth. Use a 150/180 grit file to shape the form step by step. PRO tips: – To ease material application, use upper forms or gel tips. – To prevent lifting from the free edge, recommend filing the natural nail from the inside by 1–2mm. Extensions: prepare/install forms one by one on each finger. Apply a thin substrate of the desired length and shape directly on the lower or upper form, modeling the nail architecture with gel on it. To create an arch, you can press the gel at 7–12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp for full polymerization for 60 seconds in an LED lamp or 3–4 minutes in a UV lamp. Remove residual tackiness with PREPFINISH and a lint–free cloth. Use a 150/180 grit file to shape the form step by step. PRO advice: apply the gel at least 1mm away from the cuticle to avoid material lifting in this area.