One Drop Gel Pump Filler

Refill gel for nail extension in a jar with a vacuum pump, One Drop Gel No11 – white–milky. One Drop Gel is a medium–thick camouflage gel for extensions, strengthening, and correcting the architecture of medium to long nails. It is used for: – extensions on upper and lower forms – strengthening and correcting nail architecture as a mono–product or in combination techniques with harder polymer materials. Benefits of One Drop Gel: convenient medium–thick consistency, cold polymerization, natural shades. The main advantage is the aesthetic appearance of the product throughout use. Hardness: high. Viscosity: medium. Plasticity: low. Density: medium. Pigmentation: medium. Application technology: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail. 1. Degreasing: mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free napkin) degrease the nail plate (NP. 2. Dehydration: apply NAIL FRESHER to the entire nail and let it air dry until a whitish tint appears on the surface of the NP. 3. Bonding: if using the adhesive base PRO BASE–BOND, skip this step. 4. Base layer: apply a uniform base coat using PRO BASE–BOND, thoroughly covering the side walls and free edge. Polymerize the base coat in a UV lamp for 2–3 min, or in an LED lamp for 60 sec. 5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the NP, keeping a 1mm distance from the cuticle. Apply a second leveling layer over the uncured gel, following the main principles of modeling with solid materials. Polymerize in a UV lamp for 2–4 min, or in an LED lamp for 90 sec. Remove any sticky residue with PREPFINISH and a lint–free napkin. Using a 150/180 grit file, perform a step–by–step filing of the shape. PRO tips: – for easier application of material, upper forms or gel tips can be used – to prevent lifting from the free edge, recommend filing the natural nail from the inside by 1–2mm. Extensions: prepare/install forms sequentially on each finger. Apply a thin base of desired length and shape directly on the lower or upper form and model the nail architecture with gel. To create an arch, you can hold the gel for 7–12 seconds, depending on the type and power of the lamp. Then place the nail in the lamp for complete gel polymerization for 60 sec in an LED lamp or 3–4 min in a UV lamp. Remove any sticky residue with PREPFINISH and a lint–free napkin. Using a 150/180 grit file, perform a step–by–step filing of the shape. PRO tip: apply gel with a minimum 1mm distance from the cuticle to avoid material lifting in that area.