Pro Base-Bond Gel System Base

PRO BASE–BOND is a thin bonding base for gel systems. It is used as a primer adhesive base coat under solid polymer materials: gels, acrylgels, and acrylics. The main advantage of PRO BASE–BOND is that it does not require the use of ULTRABOND or ACID PRIMER. It provides ideal adhesion of materials to the natural nail without thickening the coating and speeds up the process. It is sufficiently acidic and not suitable for clients with hypersensitive or damaged natural nails. Hardness: medium. Viscosity: medium. Density: low. Acidity: high. Application technology: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail. 1. Degreasing: degrease the nail plate mechanically (with a buffer) and chemically (with PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish tint appears on the nail surface. 3. Bonding: skip this step when using PRO BASE–BOND. 4. Base coat: apply the base evenly without leveling, paying attention to the side areas and free edge. Cure in a UV lamp for 2–4 minutes, or in an LED lamp for 90 seconds. PRO Tip: do NOT remove the tackiness from the base before applying gel products, and do NOT use a leveling layer.