Cat’s Eye Magnetic Gel Polish

Color: green Texture: cat’s eye Consistency: medium Gel polish Cat’s Eye on a glass basis 8ml M–06 – green–olive jade. The Cosmic Cat’s Eye Magnetic gel polish is a fantastic mix of enchanting cat’s eye magnetic reflections and a translucent glass base. The coating looks incredibly deep, reminiscent of the shimmer of precious and semi–precious stones. It is ideal for Korean designs when applied without a dark or colored base that matches. The plastic cat’s eye pigment allows for play with magnets, creating reflections of various shapes, curves, and sizes. Application Technology: 1. Prepare the nail plate for gel polish application: perform a manicure and shape the free edge of the nail. If using a remover, remove the residue with a damp wipe. 2. Degreasing: Degrease the nail plate mechanically (with a buffer) and chemically (with PREPFINISH and a lint–free wipe. 3. Dehydration: apply NAIL FRESHER to the entire nail, letting it air dry until a whitish tint appears on the nail surface. 4. Bonding: apply a non–acidic primer ULTRABOND to the entire nail with a semi–dry brush, retracting 1mm from the cuticle and side walls. Let it air dry for 15 seconds. 5. Base coat: apply a medium layer of base coat. Cure the base in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. For leveling the nail plate, it is recommended to use only low–acidity bases. 6. Color: If using a base, apply the color and dry it in a UV lamp for a minimum of 2–3 minutes, or in an LED lamp for at least 60 seconds. Then apply a layer of CAT’S EYE MAGNETIC gel polish. Before curing, magnetize the reflection (you can use a regular magnet, a strengthened magnet, or magnets of various shapes and sizes. Cure the gel polish in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. If necessary, apply a second layer in the same way. It is recommended to adopt a conveyor method, working on one finger at a time. If the reflection does not work out the first time, just break the pigment with a brush (simulate applying a layer of gel polish) and start over. 7. Top coat: seal the coat with a top coat. Cure in a UV lamp for 2–3 minutes or in an LED lamp for 1 minute. If using a top coat with a sticky layer RUBBER TOP, let the coating cool down, then remove the stickiness with PREPFINISH and a lint–free wipe. For leveling the nail plate with the top coat, it is recommended to use top coats of medium to thick consistency. Strict adherence to gel polish application technology is the key to long–lasting manicure without chipping, cracking, or peeling.