One Drop Gel for Nail Extensions

One Drop Gel No06 – Milk with a Pink Undertone is a medium–thick camouflaging gel in a vacuum pump jar designed for nail enhancement, strengthening, and correcting the architecture of medium to long nails. It is used for: – extending nails on forms – reinforcing and correcting nail architecture as a stand–alone product or in combination with firmer polymer materials. Advantages of One Drop Gel include: convenient medium–thick consistency, cold polymerization, and natural shades. The primary benefit is excellent self–leveling. The gel has medium pigmentation, and its natural shade camouflages the transition from the natural nail to the artificial one, blending with the color of the nail plate. It is convenient to use and store due to its vacuum dispensing system: one press equals one drop, with the drop size adjustable by the pressure applied to the pump. Hardness: high. Viscosity: medium. Plasticity: low. Density: medium. Pigmentation: medium. Note: Remove the clear protective silicone cap from the pump before use. Application Technology: 0. Prepare the nail plate: perform a manicure and shape the free edge as desired. 1. Degreasing: degrease the nail plate mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free wipe. 2. Dehydration: apply NAIL FRESHER to the entire nail and let it air dry until a whitish hue appears on the surface. 3. Bonding: if using an adhesive base PRO BASE–BOND, skip this step. 4. Base layer: apply an even layer of PRO BASE–BOND base coat, carefully covering the sidewalls and free edge. Cure the base coat in a UV lamp for 2–3 minutes, or in an LED lamp for 60 seconds. 5. Reinforcement: using a gel brush, apply a working layer of gel over the entire nail surface, leaving a 1mm gap from the cuticle. Over the uncured gel, apply a second leveling layer, following the main principles of modeling with solid materials. Cure in a UV lamp for 2–4 minutes, or in an LED lamp for 90 seconds. Remove residual tackiness with PREPFINISH and a lint–free wipe. Using a 150/180 grit file, shape the form step by step. PRO Tips: – for easier material laying, you can use forms or gel tips – to prevent lifting from the free edge, it is recommended to file the natural nail from the inside by 1–2mm. Extension: prepare/set the forms sequentially on each finger. Lay down a thin base layer of the desired length and shape directly on the lower or upper form, modeling the nail architecture with gel on top. To create an arch, you can press the gel at the 7–12 second mark, depending on the type and power of the lamp. Then, send the nail to the lamp for full gel polymerization: 60 seconds in an LED lamp, or 3–4 minutes in a UV lamp. Remove residual tackiness with PREPFINISH and a lint–free wipe. Using a 150/180 file, shape the form step by step. PRO Tip: apply gel with at least a 1mm gap from the cuticle to avoid lifting in that area.