Cat Eye Magnetic Gel Polish

Color: blue Texture: cat’s eye Consistency: medium Gel Polish Cat’s Eye on a varnish base, 8ml M–03 – blue azurite. The Cosmic Gel Polish CAT’S EYE MAGNETIC is a fantastic mix of enchanting magnetic reflections of cat’s eye and a semi–transparent varnish base. The coating appears incredibly deep, reminiscent of the shimmering effects of precious and semi–precious stones. It is perfect for Korean designs when applied without a dark or colored base. The plastic cat’s eye pigment allows for manipulation with magnets, creating reflections of various shapes, curves, and sizes. Application technology: 1. Prepare the nail plate for gel polish application: perform a manicure and shape the free edge of the nail. If using a remover, wipe off any residue with a damp cloth. 2. Degreasing: degrease the nail plate both mechanically (with a buffer) and chemically (with PREPFINISH and a lint–free cloth. 3. Dehydration: apply NAIL FRESHER to the entire nail, allowing it to air dry until a whitish hue appears on the nail surface. 4. Bonding: with a semi–dry brush, apply acid–free primer ULTRABOND to the entire nail, keeping 1mm away from the cuticle and side walls. Allow to air dry for 15 seconds. 5. Base coat: apply a medium layer of base coat. Cure the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. For leveling the nail plate, it is recommended to use only low–acid bases. 6. Color: if a base coat is used, apply the color and cure in a UV lamp for a minimum of 2–3 minutes or in an LED lamp for 60 seconds. After this, apply a layer of CAT’S EYE MAGNETIC gel polish. Before curing, magnetize the reflection (you can use a regular magnet, a strengthened magnet, or magnets of various shapes and sizes. Cure the gel polish in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. If necessary, apply a second layer in the same manner. It is recommended to work in a conveyor style, processing one finger at a time. If you do not achieve the desired reflection the first time, simply break up the pigment with a brush (replacing the application of the gel polish layer) and start over. 7. Top coat: secure the finish with a top coat. Cure in a UV lamp for 2–3 minutes or in an LED lamp for 1 minute. If using a top coat with a sticky layer, RUBBER TOP – allow the coating to cool, then remove the stickiness with PREPFINISH and a lint–free cloth. For leveling the nail plate with the top coat, it is recommended to use mediums that are medium–thick to thick in consistency. Strict adherence to the gel polish application technology is the key to long–lasting wear of the manicure without chips, cracks, or peeling.