Cover Gel for Nail Extension

TRANSLATION: SEMI–TRANSPARENT GEL IN A VACUUM PUMP JAR COVER GEL No10 – ASH PINK Cover Gel is a medium consistency camouflage gel designed for strengthening and salon nail extensions to medium length. It is used for: strengthening short nails in the technique with a correction border, architecture correction in the no filing technique, and salon–style medium–length extensions. The gel has a base–like consistency and controlled self–leveling, making it suitable for quick work. The semi–transparent natural shades gently camouflage the natural nail, creating an ideal base for French manicures. It is convenient to use and store thanks to the vacuum dosing system: one press equals one drop. The drop volume can be adjusted based on the pressure applied to the pump. Advantages of Cover Gel: The medium viscosity allows for quick conveyor–style work. Optimal viscosity – self–levels smoothly, leaving minimal work for further finishing. The semi–transparent coating creates an exquisite Clean Girl effect. Hardness: 8/10 Viscosity: 5/10 Stickiness: 4/10 Plasticity: 3/10 Pigmentation: 4/10 HOW TO APPLY THE GEL: 0. Prepare the nail plate: remove the previous coating, perform a manicure, and shape the free edge of the nail. 1. Degreasing: chemically (with PrepFinish and a lint–free wipe) and mechanically (with a 180/240 file) degrease the natural nail. 2. Dehydration: apply Nail Fresher over the entire nail, allowing it to air dry until a whitish hue appears on the surface. 3. Bonding: if using the adhesive base PRO Base–Bond, skip this step. 4. Base layer: apply an even layer of the PRO Base–Bond primer, thoroughly covering the sidewalls and free edge. Polymerize the base coat in an LED lamp for 60 seconds. For convenience during further gel application, remove the sticky layer from the base. 5. 1. Strengthening: with a gel brush, apply a thin layer of gel over the entire surface of the natural nail, maintaining a 1. 5mm gap from the cuticle. Apply a second self–leveling layer over the uncured gel, adhering to the primary principles of modeling with gel. Polymerize in an LED lamp for 90 seconds at a reduced 24W power setting. Remove residual stickiness with PrepFinish and a lint–free wipe. Using a 150/180 file, gradually file the form and thin down the natural nail from the inside by at least 1mm with a drill bit or file. 5. 2. Extensions: prepare/install forms sequentially on each finger. With a 1. 5mm gap from the cuticle area, lay down a thin foundation of the desired length and shape directly on the lower or upper form, modeling the nail architecture with gel. Polymerize in the LED lamp for 90 seconds at a reduced 24W power setting. Remove residual stickiness with PrepFinish and a lint–free wipe. Gradually file the form with a 150/180 file. PLEASE NOTE: BEFORE USE, REMOVE THE TRANSPARENT PROTECTIVE CAP FROM THE PUMP.