Funky Gum Gel in Tube

Chewing Gum Gel 15ml in a tube – transparent Funky Gum – a gel chewing gum for 3D designs with a sticky layer. It is used for 3D designs and molding volumetric elements of any size and shape. The chewing gum gel maintains flexibility after polymerization, minimizing trauma during the wear of bulky designs. It is not recommended to apply Funky Gum over the entire surface of the nail. Physico–chemical properties: consistency – thick, polymerization speed – low, post–polymerization – flexible, pH – 6. APPLICATION TECHNOLOGY: 0–4 Prepare the nail plate in the standard way: manicure, degreasing, dehydrating, bonding. Apply a base coat and color as needed. 5. Design: 5. 1. Squeeze a small amount of chewing gum gel and create a volumetric element of the desired shape. For application, periodically moisten the tool (or fingers) with alcohol–based PREPFINISH liquid. 5. 2. Place the decorative element on the sticky layer of the coating. Polymerize in a UV/LED lamp for 120/60 seconds. 5. 3. Remove the sticky layer using PREPFINISH and a lint–free wipe. 6. Top: secure the finished design with a top coat. Use a liner for hard–to–reach areas. Polymerize in a UV lamp for 2–3 minutes, in a LED lamp for 1 minute. Removal: to remove designs with Funky Gum, we recommend using scissors to cut the main volume, and removing the leftovers with a drill or by soaking with Gel Remover. PRO TIP: – FOR EASE OF USE, WE RECOMMEND CREATING VOLUMETRIC ELEMENTS BY HAND WITHOUT GLOVES – TO INCREASE DESIGN VARIABILITY, YOU CAN MIX DRY PIGMENTS, GLITTER, AND OTHER DRY DECOR INTO THE CHEWING GUM GEL.