ULTRA GEL Nail Extension Gel

Color: Pink Consistency: Thick The ADORE professional No05 color modeling gel for nails is a rich pink–purple ULTRA GEL. It is a medium–thick gel in vibrant shades for extending and strengthening salon–length nails. The gel has a medium–density pigment that does not change color after polymerization. It has medium viscosity and quickly forms a droplet when the nail is flipped. Highly adhesive. No shrinkage. Odorless. Usage: 1. Modeling on forms, correction using the no–file technique. 2. Colored strengthening of medium–length natural nails. Application technique: 0. Prepare the nail plate: perform a manicure and shape the free edge of the nail. If using a remover, wipe off residues with a damp cloth. 1. Degreasing: degrease the nail plate both mechanically (with a buffer) and chemically (using PREPFINISH and a lint–free cloth. 2. Dehydration: apply NAIL FRESHER to the entire nail and allow it to air dry until a whitish film appears on the nail plate. 3. Bonding: using a half–dry brush, apply the acid–free ULTRABOND primer to the entire nail, staying 1mm away from the cuticle and sidewalls. Allow to air dry for 15 seconds. If using MULTI BASE, this step can be skipped. 4. Base coat: apply a thin layer of MULTI/RUBBER BASE cushioning base coat. Polymerize the base coat in a UV lamp for 2–3 minutes or in an LED lamp for 60 seconds. 5. Modeling: prepare and place the form alternately on each finger, laying down a thin base of the desired length and shape directly on the lower or upper template, keeping a 1mm distance from the cuticle to form the nail arch. The gel can be pinched between the 7th and 12th second, depending on lamp type and power. Send the nail for complete polymerization for at least 60 seconds in an LED lamp or for 3–4 minutes in a UV lamp. Remove the sticky residue with PREPFINISH and perform step–by–step filing of the form, filing the natural nail inside by 1mm. 6. Topcoat: secure the finish with a topcoat. Polymerize in a UV lamp for 2–3 minutes or in an LED lamp for 1 minute. If using a sticky RUBBER TOP coat, allow the finish to cool, then remove the tackiness with PREPFINISH and a lint–free cloth.